Wall-Mounted Media Units: What Actually Changes When You Take the Legs Off

Product info: END OF SUMMER SALE

Taking the legs off a media unit does more than change how it looks — it changes the fixing, the cable routing, and how you clean underneath it. Here's what actually shifts once a unit goes on the wall instead of the floor.

1. The fixing question comes first

Our Wall Mounted Media Unit mounts flush with no legs at all, at 88cm wide and 24cm tall — genuinely light as an empty unit, but the total weight once a TV, a soundbar, and a stack of discs go on top adds up fast. Use a bracket rated for the combined weight of the unit plus everything you plan to put on it, not just the empty unit's weight, and check whether you're fixing into a stud or masonry before choosing the fixing type.

2. Cable routing changes completely

On a floor-standing piece like our Curved Media Unit with Brass Accents, cables run down a leg or along the skirting board and stay mostly hidden by the unit's own height off the floor. Wall-mounted removes that route entirely — cables either run exposed down the wall to the nearest socket, or through a purpose-cut hole, which is a bigger job than most people budget time for. Plan the cable route before you mount, not after; moving a wall-mounted unit once it's fixed is a full rework, not a five-minute adjustment.

3. Floor space and cleaning underneath

Removing the legs also removes the gap and the dust that collects under a floor-standing unit — nothing to vacuum around, no shadow gap to clean. It also means the wall itself carries the room's visual weight if cables aren't tidied, since there's no unit body sitting low down to anchor the space the way a floor-standing piece does.

4. Getting the height right for your sofa

Mount too high and the screen sits above natural eye line for a long film; too low and the drawers become impossible to open without crouching. As a working guide, aim for the centre of the screen to land roughly at seated eye height from your usual spot on the sofa, then measure down from there to fix the unit itself.

Legs Off Changes the Job, Not Just the Look

Wall-mounting a media unit isn't just a style choice — it changes the fixing you need, where the cables go, and how you measure for height. Get those three right and the floating look holds up; skip them and it's the first thing that looks wrong in the room.